Red.com RED ONE Instructions d'exploitation télécharger pdf (Page 7)

Operating Instructions: RED CHARGER

Thischargersequentiallychargestwobatterieswithcharging

currents of up to 4.8 Amperes.

•PluganACpowercordprovidedintothechargerACinput

•PlugandswitchontheACmainssupply

•InsertabatteryinsideanyoneofthetwoV-plateadapters

•ObservetheLED.Inaddition,thechargestatusmaybereadin

 20%stepsthroughtheREDBRICKbatteryLEDarray

 (seetableonpage5).

•Leavethebatterytochargefortheappropriatetime

 (seetableonpage4)

•UnplugthebatterywhentheLEDbecomessteadygreen

In the case when you want to charge 2 batteries:

Insert the second battery into the second V-plate adapter.

The LEDs will always display the correct status of the charging

process for each battery.

In the case when an accessory is plugged into the 6 pin LEMO

auxliarypoweroutput,thechargingprocesswillbesuspended.The

AUX LED will light up and the other battery LEDs will show ‘WAITING’.

Oncetheaccessoryhasbeenunplugged,thechargerwillcontinuethepreviouschargingsequenceandfromthesamepointofinterruption.

NOTE THAT THE MAXIMUM LOAD THAT CAN BE CONNECTED TO THE LEMO OUTPUT SHOULD NOT EXCEED 100W.

ADDITIONAL SAFETY NOTES

Chargersand/orbatteriesmaybecomehotduringcharging.Thisisnormal.PleaseconsultREDifyounoticethateitheracharger

orabatterybecomeexcessivelyhotduringthechargingoperation

Becarefulnottoblocktheequipment’sventilationoutlets

Neverinsertanymetallicoranyotherobjectsinsidetheequipmentthroughtheventilationopeningsorotherwise.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Red.com RED ONE Instructions d'exploitation Page 7